Connect the power switch and cable to Darcy and press the button
Give Darcy a few minutes to join your network and get settled (3-5 minutes)
Wait for the LED on the front of Darcy to turn blue
Wifi Setup
Make sure the unit is on the local network via Ethernet first
Connect the power switch and cable to Darcy and press the button
Wait for the LED on the front of Darcy to turn blue
Using your web browser, visit “http://'darcy-hostname':12345”, example http://darcy:12345 (replace "darcy-hostname" with your actual Darcy Cam device name found in your welcome email or on the bottom of your Darcy Cam)
Enter your wifi network name and password, click “Add Network” (network name is case sensitive)
Click reboot button and give Darcy a few minutes to join your network and get settled (3-5 minutes)
You are now free to unplug your ethernet cable. If the unit does not connect to your wireless network, please repeat steps 1-6 and make sure your SSID and password to your network is correct and case sensitive